Cable Plaza

• Water-blocking protects against exposure to moisture

• Crush protection and UL direct burial rating makes cable suitable for underground installation
• Sun and noise resistance makes cable ideal for use in outdoor environments
• 300V PLTC rating for use on power limited trays
• CM rating for fire resistance

Belden Yj57187, 24 Awg X 1 Pair Rs-485 Cable : 24 Awg Stranded (7×32) Tinned Copper Conductors, Ldpe Insulation, Overall Beldfoil® Shield, Tinned Copper Braid, Tinned Copper Drain Wire, Overall Pvc Jacket.

Profibus, 1 Pair 22AWG (Solid) Bare Copper, PE Insulation, Overall Beldfoil®+Tinned Copper Braid(65%) Shield, PVC Outer Jacket, PLTC CMG AWM 20201 SUN RES Profibus DP

Electronic, 2 Conductor 22AWG (7x30) Tinned Copper, PE Insulation, Overall Beldfoil® Shield, PVC Outer Jacket, CM

Electronic, 2 Conductor 18AWG (16x30) Tinned Copper, PE Insulation, Overall Beldfoil® Shield, PVC Outer Jacket, CM


Suitable Application : low voltage analog signals (4-20ma, 0-10v) low voltage digital control (24v) line level audio computer communication; panel wiring.

RS-485, 2 Pair 24AWG (7x32) Tinned Copper, PE Insulation, Overall Beldfoil®+Tinned Copper Braid(90%) Shield, PVC Outer Jacket, CM

Suitable Application : RS-485, POS; Computer communications; Low Voltage Analog Signals (4-20ma, 0-10v, ...); Low Voltage Digital Control (24v, …); Line Level Audio; Panel Wiring; serial communication (RS-485 standard) comprising of PLCs, VFDs, HMIs, motors, RTU, SCADA, etc. within noisy environments over long distance, etc.

22 AWG stranded (7x30) tinned copper conductors, Datalene® insulation, twisted pairs, overall Beldfoil® shield (100% coverage) plus a tinned copper braid (65% coverage), drain wire, UV resistant PVC jacket.

Construction:

Design: 1 Pair 22 AWG 
Conductor: Solid Bare Copper
Insulation: FHDPE – Foam High Density Polyethylene
Shielding: AL/PET-Mylar & Tinned Copper Braid shield
Outer Jacket: PVC - Polyvinyl Chloride
EU RoHS compliance: Yes

Mechanical Properties:

Flame Retardancy: IEC 60332-1-2
Operating temperature: -20°C to 70°C

Electrical Properties:

Voltage Rating: 300V 
Impedance (3MHz – 20MHz): 150 ± 15 Ohms (Nom.)
Attenuation (16MHz): 5.40 dB/100mtr (Max.)
Velocity of Propagation: 78 % (Nom.)

Target Application:

Suitable to Operate sensors and actuators via a centralised controller in Plant automation applications, Chemical Industries, Oil, gas and pharma industries.

• Long distance reach (1km) with a bandwidth of 10 Mbps and frequency of 0.1-20 MHz
• Medium distance reach (40m) with a bandwidth of 1 Gbps and frequency of 1-600 MHz
• Supports Time-Sensitive Networking technology to provide deterministic services
• Compatible with standard SPE connectors recommended by IEEE and TIA
• Higher bandwidth compared to most fieldbus
• Easy to terminate
• Designed to withstand harsh industrial environments with strong shielding and jacketing options
• Many variations, including continuous flex, small diameter and low smoke zero halogen versions to fit a wide variety of applications

Construction:

Design: 1 Pair 18 AWG 
Conductor: Stranded Tinned Copper
Insulation: Polyolefin
Shielding: AL/PET-Mylar & Tinned Copper Drain Wire
Outer Jacket: PVC - Polyvinyl Chloride
EU RoHS compliance: Yes

Mechanical Properties:

Flame Retardancy: IEC 60332-1-2
Operating temperature: -20°C to 70°C

Electrical Properties:

Voltage Rating: 300V
Impedance (31.25 KHz): 100 ± 20 Ohms
Attenuation (39 KHz): 0.3 dB/100mtr (Max.)
Velocity of Propagation: 66% (Nom.)

Target Application:

PA cable used to connect the Field Devices to PLC’s, Oil Gas, and Pharma Industries.

The RS-485 Belden cables are the reference choice for automation systems, including Modbus, BACnet MS/TP, CANopen, or DMX512. Low capacitance and enhanced noise protection allow extended reach and the highest performance under harsh conditions, as well as improving safety in case of fire.

High Temp Plastic Lead Wire, 28AWG (7x36) Silver Plated Copper, TFE Insulation, AWM 1371 105C TYPE ET MIL-W-16878/6 250V 200C

Computer, Instrument & Medical Interconnect, 26 AWG stranded (7x34) tinned copper conductors, PVC insulation, Duofoil® shield (100% coverage), 26 AWG stranded tinned copper drain wire, PVC jacket.